Plywood sheet parts for strong visible work.
Decide with Milplex how layer build-up, veneer side, edge appearance, mounting points and CNC route come together in your project.
The full material route remains visible below the hero.
Choose material, capability and use case together
Plywood works well for lecterns, displays, interior parts and robust sheet constructions where strength and appearance both matter.
- Applications
- Lecterns, displays, structural parts, interior and retail interiors
- Relevant capabilities
- CNC routing, drilling, sanding, finishing and assembly
- Limits
- Layer build-up, splintering, visible side and finishing guide the result
- Multiplex
- Structure
- Visible finish
Remove uncertainty before quoting
This guide sharpens the request without requiring every technical detail up front.
Choose plywood for strong structural visible parts, lecterns, displays and interior work with warm material character.
Not ideal without wood grade, load, layer build-up, visible side and desired edge finishing.
Define visible edges, polished or sanded edges, mounting points and packaging for customer-ready delivery.
Material, capability and quote input in one overview
Indicative market range; Milplex confirms manufacturability, tolerances and planning per drawing.
Displays, covers, letters, showcases and visible parts.
Laser for clean contours and visible edges; CNC for holes, pockets, fit and thicker or stress-sensitive parts.
Market indication: Indicative laser range in the market: about 0.5-25 mm, depending on quality, type and edge appearance.
Send along: State cast/extruded type, visible side, protective film, edge finish and any fit requirements.
Displays, protective parts, transparent covers and visible work where impact resistance matters.
CNC or laser after material review; bending and polishing are reviewed by use case and visible quality.
Market indication: Indicative market range: reviewed per drawing, especially for heat, bending and edge appearance.
Send along: State end use, visible side, bending, scratch requirements and mounting context.
Protective covers, technical visible parts and components where impact resistance matters more than optical laser edge.
CNC is often safest for fit, holes and edge control; laser only after material and edge review.
Market indication: Indicative laser range in the market: about 0.1-6 mm, but CNC is often more logical for functional parts.
Send along: Check heat behaviour, scratch sensitivity, visible side and mounting load.
Functional parts, panels, temporary displays, protective pieces and technical sheet parts.
CNC is usually the first route; laser only when material, safety and edge quality fit.
Market indication: Indicative PE laser range in the market: about 1-15 mm; PVC and HIPS are always reviewed for process and safety first.
Send along: State plastic type, data sheet if available, use case and visible quality.
Facade signage, panels, wayfinding, signage and flat interior accents.
CNC routing, engraving, drilling and mounting preparation are usually leading.
Market indication: Indicative market range: determined by brand, thickness, core and mounting.
Send along: State outdoor use, viewing distance, mounting, colour, panel size and drill plan.
Interior panels, robust visible parts, displays and ready-to-install sheet parts.
CNC for contour, holes, cut-outs and edge control; engraving only after decor and visible-side review.
Market indication: Indicative market range: reviewed by decor, thickness, carrier and edge finish.
Send along: Visible side, chipping sensitivity, mounting points and edge finish determine the route.
Prototypes, displays, templates, presentation parts and interior shapes.
CNC routing for contour, pockets, radius and shape; finishing defines the final appearance.
Market indication: Indicative market range: depends on sheet quality, fixturing, detail level and finish.
Send along: State visible side, coating/foil/finish, moisture load and assembly needs.
Structural visible parts, lecterns, interiors, displays and repeatable sheet sets.
CNC for clean contours, holes, pockets and mounting preparation.
Market indication: Indicative market range: reviewed by build-up, veneer side, thickness and splinter risk.
Send along: State veneer side, visible side, edge appearance, mounting points and required finish.
Good files make the quote precise faster
Milplex checks resolution, vector lines, layer structure, dimensions and visible side. Even if your file is not perfect yet, clear input helps choose the right production route.
- DXF
- DWG
- STEP
- AI/EPS
Which production route fits this material?
Material affects not only appearance, but also tolerance, edge quality, mounting and lead time.
CNC routing
For precision routing, surfacing, profile routing, drill holes and repeatable parts where dimensions matter.
- Files
- DXF, DWG, PDF, STEP
- Typical work
- Precision routing, surfacing, drill holes
- Strong for
- Dimensions and repeatability
- Acryl/plexiglas
- ACM
- HPL
- MDF
Polishing and finishing
For flame polishing, mechanical polishing, diamond polishing and manual finishing of visible edges.
- Files
- PDF, foto, werktekening
- Typical work
- Clear edges, visible sides, delivery
- Strong for
- Professional visible quality
- Acryl/plexiglas
- HPL
- Hout
- MDF
Assembly
For bonding, mechanical assembly, complete constructions, finishing and packaging of customer-ready products.
- Files
- STEP, PDF, foto
- Typical work
- Displays, showcases, counters, lecterns
- Strong for
- Complete delivery
- Acryl/plexiglas
- ACM
- Hout
- HPL
Compare material choice with real routes
Bravour lectern
- Question
- A presentation product needed to look clean, be stable, hide cables neatly and be delivered as a complete product.
- Material
- Wood, visible parts and reading surface with clean edge finishing.
- Route
- CNC routing, finishing and assembly.
- Result
- A presentation product combining function, stability and appearance, with a route suitable for repeatable custom work.
- Combination of visible work, stability and assembly.
- Suitable reference for presentation products and lecterns.
- Assembly and finishing choices included from the request.
- Quantities
- Suitable for repeatable custom work after first product specification.
- Turnaround
- Confirmed after file review, material choice and assembly choice.
Hof van Brabant counter
- Question
- A new counter required accurate dimensions, visible quality and assembly-ready delivery.
- Material
- Interior-grade sheet material with visible finishing.
- Route
- CNC routing, finishing and assembly-focused production.
- Result
- A custom counter solution connecting production, finishing and installation context directly.
- Visible quality and installation context specified up front.
- Interior route with CNC, finishing and practical delivery.
- Strong reference for counters, retail interiors and interior parts.
- Quantities
- Project-based custom work aligned with mounting and visible side.
- Turnaround
- Confirmed after dimensions, finishing and installation context.
Unsure about this material?
Send function, thickness, visible side and mounting requirements.
Common questions about this material
Answers about suitable use, limitations, capability and quote input.
Which capability fits my project best?
That depends on material, geometry, level of detail and volume. Milplex helps choose between laser cutting, CNC routing and engraving.
Can Milplex advise on tolerances and finishing?
Yes. During file review we look at cut-outs, edge finishing, material behaviour and production feasibility.
Can Milplex handle repeat production?
Yes. We support both prototypes and repeat production when material, planning and files are aligned.
Sneller naar een materiaal-passende offerte
Voor sterke constructieve zichtdelen, katheders, displays en interieurwerk.
Materiaalkeuze versnellen
- Binnen- of buitengebruik
- Formaat, dikte, kleur en afwerking
- Bewerking, montage en aantallen
Veelgestelde vragen over deze route
Waar moet ik op letten bij Multiplex?
Benoem toepassing, binnen- of buitengebruik, dikte, zichtzijde, kleur, afwerking en montagewijze.
Welke bewerkingen passen bij dit materiaal?
Dat hangt af van dikte, vorm, randkwaliteit en zichtwerk. Milplex adviseert tussen CNC, laser, graveren, afwerken en assemblage.
Kan ik alternatieve materialen laten vergelijken?
Ja. Vermeld uw twijfel of budgetrichting; Milplex kan meerdere materiaalopties naast elkaar beoordelen.
Van materiaalvraag naar productieroute
De juiste productieroute volgt uit toepassing, formaat, dikte en zichtzijde-keuze.
- Toepassing beschrijven
Benoem binnen/buiten, zichtwerk, belasting, montage en gewenste uitstraling.
- Materiaal vergelijken
Dikte, kleur, stijfheid, randgedrag en bewerking bepalen de beste keuze.
- Bewerking koppelen
Materiaalkeuze wordt gekoppeld aan CNC, laser, graveren, afwerking of assemblage.
- Offerte scherp maken
Met aantallen, deadline en bestanden kan Milplex snel concreet reageren.
